Plasmost

QC-677T-

Manual Thermo Press Forming Machine Product Serial : QC-677T

<!DOCTYPE html>
<html>
<body>

<table style=”width:100%”>

<tr>
<td>Model</td>
<td>QC-603G</td>
</tr>

<tr>
<td>Material</td>
<td>Hardness of polymer specimen</td>
</tr>

<tr>
<td>Horse power</td>
<td>DC Motor 600W</td>
</tr>

<tr>
<td>Cutting speed</td>
<td>High speed 3600 RPM，Low speed 1800 RPM</td>
</tr>

<tr>
<td>Specimen thickness</td>
<td>2 ~ 15 mm</td>
</tr>

<tr>
<td>Minimum cutting R angle</td>
<td>R＝6 mm</td>
</tr>

<tr>
<td>Accessories</td>
<td><br>1.With one dumbbell shape cutter, customized shape is also acceptable but cannot be wider than 100mm and longer than 250mm.
<br>2.With transparent protection cover.
<br>3.With cleaner to keep it clean when operating.
<br>4.Equipped with track to increase the stability, safety and fluency.</td>
</tr>

<tr>
<td>Power</td>
<td>Single phase110V or 220V((Designate)</td>
</tr>

<tr>
<td>Dimension</td>
<td>47 × 40 × 45 cm (W x D x H) </td>
</tr>

<tr>
<td>Weight</td>
<td>60 kg</td>
</tr>

</table>

</body>
</html

Categories: Dry Coatings & Plastic Testing, Melt Flow Index Tester

Description

Description

Manual Thermo Press Forming Machine
Product Serial : QC-677T

This model is built to form raw materials into samples for testing or color matching. Automated molding steps: Put raw materials into molds then place it between compression heating plates to press the air out, heat up the material, and cool it down with water cooling system (optional). It can also be used for basis factory mass production. With our latest and interactive controller users can understand setting and process easily. Real-time data for force, time and temperature will be provided to users for instant control. And our various selections of data units can save users a lot of time from calculating.

Model	QC-677T
Pressure(Tons)	5、10 ton (optional)
Units	Temperature：℃、℉ Area：m2、cm2、mm2、ft2、in2 Energy：kgf、gf、tonf(long)、tonf(short)、lbf、ozf、kN、N、tonf(SI) Pressure：bar、kgf/cm2、KPa、MPa、mm-Aq(4℃)、psi
Temperature	Room temperature ~ 300℃
Heating time	50℃→150℃ take 18mins
Cooling time	150℃→60℃ take 10mins
Cooling method	Water cooling system
Size of heating- plate	15x15cm
Distance between heating plate	60~100 mm (Adjustable)
Accessories	Sample mold*1 (Dimension:10x10x0.2 cm)
Control	7” touch screen
Display	Instant feedback on force and temperature
Power	Single phase，220V/50Hz or 60Hz
Dimension	69×35×75 cm(W×D×H)
Weight	110 kg