H.D.T. Heat Deflection Tester Confirm to ASTM D648, ISO 75-1 Standard Product Serial : QC-654

<!DOCTYPE html>

<table style=”width:100%”>


<td>Hardness of polymer specimen</td>

<td>Horse power</td>
<td>DC Motor 600W</td>

<td>Cutting speed</td>
<td>High speed 3600 RPM,Low speed 1800 RPM</td>

<td>Specimen thickness</td>
<td>2 ~ 15 mm</td>

<td>Minimum cutting R angle</td>
<td>R=6 mm</td>

<td><br>1.With one dumbbell shape cutter, customized shape is also acceptable but cannot be wider than 100mm and longer than 250mm.
<br>2.With transparent protection cover.
<br>3.With cleaner to keep it clean when operating.
<br>4.Equipped with track to increase the stability, safety and fluency.</td>

<td>Single phase110V or 220V((Designate)</td>

<td>47 × 40 × 45 cm (W x D x H) </td>

<td>60 kg</td>




H.D.T. Heat Deflection Tester Confirm to ASTM D648, ISO 75-1 Standard
Product Serial : QC-654

QC-654 Test specimen placed on the Charpy of structure and main function is test of center position 0.445MPA or 1.82MPA of bending stress. The test environment temperature increase 2℃/min. To measure specimen center of deformation in 0.25mm temperature value as deformation temperature.


This test is suitable for the material at 27℃ which still as hard material. The specimen length 127mm, the deviation between is 0.13mm. The thickness 13mm and width 3mm to 13mm.


Industry : Plastic


Model QC-640
Temperature Room temperature~ 300℃
Temperature Control Temperature rise speed 2℃/min
Weight sets Basic weight support load is 3N. Each test fixture will enclose as below quantity:
Deformation 0.01 ~ 10 mm
Span 100 mm(max.) adjustable 50mm
Radius of support Camber R angle 3.0 mm
Specimen size
ASTM standard L=5”(127 mm),d=1/2 ”(12.7 mm),b=1/4”( 6.35 mm)
ISO edge wise testing standard L=120mm,d=10mm,b=4mm
ISO flat wise testing standard L=80mm
※Specimen size difference should be limited within 0.1mm
Test quantity
Mechanical gauge 0.01~10mm
Electronic gauge 0.001~10mm
PLC control 0.001~10mm
Set:1、2、3、6 set

    Leave Us A Message