Plasmost

qc-677a

Manual Thermo Press Forming Machine Product Serial : QC-677A

<!DOCTYPE html>
<html>
<body>

<table style=”width:100%”>

<tr>
<td>Model</td>
<td>QC-603G</td>
</tr>

<tr>
<td>Material</td>
<td>Hardness of polymer specimen</td>
</tr>

<tr>
<td>Horse power</td>
<td>DC Motor 600W</td>
</tr>

<tr>
<td>Cutting speed</td>
<td>High speed 3600 RPM，Low speed 1800 RPM</td>
</tr>

<tr>
<td>Specimen thickness</td>
<td>2 ~ 15 mm</td>
</tr>

<tr>
<td>Minimum cutting R angle</td>
<td>R＝6 mm</td>
</tr>

<tr>
<td>Accessories</td>
<td><br>1.With one dumbbell shape cutter, customized shape is also acceptable but cannot be wider than 100mm and longer than 250mm.
<br>2.With transparent protection cover.
<br>3.With cleaner to keep it clean when operating.
<br>4.Equipped with track to increase the stability, safety and fluency.</td>
</tr>

<tr>
<td>Power</td>
<td>Single phase110V or 220V((Designate)</td>
</tr>

<tr>
<td>Dimension</td>
<td>47 × 40 × 45 cm (W x D x H) </td>
</tr>

<tr>
<td>Weight</td>
<td>60 kg</td>
</tr>

</table>

</body>
</html

Categories: Dry Coatings & Plastic Testing, Melt Flow Index Tester

Description

Description

Manual Thermo Press Forming Machine
Product Serial : QC-677A

This machine has two separated (up and down) heating plates. It use jack to make two plates to clamp and set the plastic or rubber material into the mold than press start bottom to heating, molding, cooling to make the raw material forming. It can do physical property of test, color comparison and as the sample used in mass-producing purposes. Standard assort with the touch panel in guided conversation style screen, user can precisely and smoothly to proceed with test. User can easily have the defined unit calculated value from the built-in unit. Also, display the graph on panel for user to control testing immediacy information like force, time, and temperature.

Industry:Rubber, plastic

Model	QC-677A
Pressure(Tons)	10、20、30、50 (Tons)。Or specified capacity
Units	Temperature：℃、℉ Area：m2、cm2、mm2、ft2、in2 Force ：kgf、gf、tonf(long)、tonf(short)、lbf、ozf、kN、N、tonf(SI) Pressure：bar、kgf/cm2、KPa、MPa、mm-Aq(4℃)、psi
Temperature	Room temperature ~ 300℃
Temperature range	Temperature rise rate：50℃ to 150℃ within 18 minutes Cooling rate：150℃ to 50℃ within 10 minutes
Cooling method	Cooling water circulation(optional)
Size of heating- plate	25x25cm(standard)	30×30 cm (optional)
Interval distance between heating plates	60~100 mm（adjustable）
Accessory	forming mold for specimen 1set
Control	7” touch panel
Display	Immediacy Force、Temperature、Graph
Power	Single phase，220V/50Hz or 60Hz
Dimension	53×62×145 cm(W×D×H)
Weight	10 tons: about 200kg 20 tons: about 250kg 30 tons: about 300kg 50tons: about 350kg