QC-655

Vicat Heat Deflection Tester Confirm to ASTM D1525 ISO 306 GB T1633 Standard Product Serial : QC-655

<!DOCTYPE html>
<html>
<body>

<table style=”width:100%”>

<tr>
<td>Model</td>
<td>QC-603G</td>
</tr>

<tr>
<td>Material</td>
<td>Hardness of polymer specimen</td>
</tr>

<tr>
<td>Horse power</td>
<td>DC Motor 600W</td>
</tr>

<tr>
<td>Cutting speed</td>
<td>High speed 3600 RPM，Low speed 1800 RPM</td>
</tr>

<tr>
<td>Specimen thickness</td>
<td>2 ~ 15 mm</td>
</tr>

<tr>
<td>Minimum cutting R angle</td>
<td>R＝6 mm</td>
</tr>

<tr>
<td>Accessories</td>
<td><br>1.With one dumbbell shape cutter, customized shape is also acceptable but cannot be wider than 100mm and longer than 250mm.
<br>2.With transparent protection cover.
<br>3.With cleaner to keep it clean when operating.
<br>4.Equipped with track to increase the stability, safety and fluency.</td>
</tr>

<tr>
<td>Power</td>
<td>Single phase110V or 220V((Designate)</td>
</tr>

<tr>
<td>Dimension</td>
<td>47 × 40 × 45 cm (W x D x H) </td>
</tr>

<tr>
<td>Weight</td>
<td>60 kg</td>
</tr>

</table>

</body>
</html

Categories: ,

Description

Vicat Heat Deflection Tester Confirm to ASTM D1525 ISO 306 GB T1633 Standard Product Serial : QC-655

QC-655 Vicat softening of temperature (VST) is the specimen was measured by the fixed load 1kg (or 5kg). When the cross-sectional 1mm² of standard needle punctures into surface 1mm deep of temperature, the testing specimen of ambient temperature should be 50 degrees per hour in rise speed steady. The specimen requires 3mm ~6.5mm (thickness) and size will be 10x10mm or dia. 10mm at least.

 

Industry : Plastic、Rubber

Model No. QC-655
Temperature Room temperature ~ 300℃
Control Temperature 50℃/per hour
Weight Method A：1Kg、Method B：5Kg
Deformation display 0.01 ~ 10 mm
Specimen size
  • At least two specimens prepared and at least have 3 to 6.5mm thickness and size 10mm2., the two sides of specimen should parallel, surface is smooth without crack or air bubble.
  • If thickness is over 6mm, should cut one side surface to around 3mm (thickness) , the other side remain the same.
  • If the thickness is below 2.5mm, fold 3 pieces (max) together to make the thickness at least 3mm.
    		•
    Testing Sets
    Mechanical meter 0.01~12mm
    Digital meter 0.001~12mm
    PLC control 0.001~12mm
    Set choice: 1、2、3、6 sets

    Related products

      Leave Us A Message